Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lose their keys may be worried about the expense and inconvenience of replacing it. There is a solution to avoid the expense of making your own key fob.
You'll require a phillips screwdriver with a flat head to accomplish this. Place the screwdriver in the slot that is located in the middle of the case and slowly push it open.
Cost
The majority of SAABs have two keys when they are new, but some used vehicles only have one. In this scenario, the owner will have to purchase a new key. This can be expensive. There are a variety of ways to save money on this procedure. For instance, if only need a replacement key fob case and you want to save money by purchasing an old case from a dealership. However, you should be aware that these cases do not contain the emergency key or badge and are more prone to wear out very quickly.
You also have to pay for the installation and programming the TWICE module. These costs can be expensive, especially if you don't have an extra.
For this reason, it is crucial to have at least two keys for your car. This way, in the event that you lose the only working key it won't leave you without a means of transportation.
It's not as hard as it may seem to add an additional Saab 9-3 key. The main issue with this is that the key needs to be linked to the car's computer. This can be accomplished by an authorized dealer, but it may take some time to set up an appointment. Luckily, you can locate the necessary information on the internet to aid you in the procedure.
Installation
Most Saab vehicles built after 1995 have a special immobilizer that makes use of an electronic key fob to control the engine of the car. The system also controls door locks as well as remote functions of the vehicle. It is essential to have a spare key available to avoid losing the original one and having your car stolen. The good news is that if you lose your only working Saab key, there are ways to get it replaced without having to pay the expense of a dealer service.
First, you need to make the new key fob. This can be done by using the flathead screwdriver for prying the case open. Put the screwdriver into the small hole in the middle of the case, and then gently move the screwdriver. If you're having trouble, try using different angles. After you've opened the case, remove the electronics and put them into a brand new fob case.
Once you have the replacement fob and the key, you are able to begin the programing process. You will need to hook up your Tech2 and follow the steps for the NG 9-3 (with or without a key). It is advised to get a replacement unit TWICE that has been mated with the correct transponder and key. This unit is available online. But, you must make sure that it is an OEM replacement.
Programming
Tech 2 Tech 2 is required to add an additional key to the Saab 9-3. It also involves programming the car to recognize the new key. This is more complicated than simply copying the metal key and it must be done by a professional to prevent damage to the vehicle's electronic system. If you're considering acquiring a spare key for your car, you should try to do it as quickly as you can. If you put off it could cost you a lot more in the future.
In addition to putting in an additional key, you'll have to replace the CIM or TWICE module. This is usually a mail-order process and isn't something you can get through an aftermarket vendor. The cost of a new car can be high in relation to the car's model.
The dealer will charge you top dollar for replacing the car computer, but you have another option! S.A. Locksmith & Security will RE-Program your Saab computer to prepare it for the new key. This will reduce the cost of a new car computer. This service is quick, simple and inexpensive. You can save up to 50% of what a dealer would charge you. This is a great option for those who have lost their keys.
Remotes
replacement saab car keys G28CarKeys -3 Viggen is one of the most original cars to bear the Saab badge. It was a Scandinavian front-drive fighter jet-inspired beast that was both fast and enjoyable to drive. Although many other Saab models were built after it, very few were as quirky.
If you have a 9-3 Saab and lose the key fob, it's crucial to replace it as soon as possible. Contrary to the more popular European hot hatchbacks, Saab vehicles come with an immobilizer system that requires a unique key to start. If you have a spare key, the process of replacing it is easy. If, however, you don't it could be costly and time-consuming.
You could save money if purchase an old key fob replacement and then have it programmed locally by a locksmith. Be cautious when purchasing used keys from eBay and other online shops. They might not be genuine, and you could end up paying more in the long run.
Anyone can take out the electronics and battery from an old key fob by using the small screwdriver that is flathead. Be careful not to harm any of the small electronic components inside the case. Avoid pouring liquids into the case, as this could cause damage. You should also avoid buying cloned keys through aftermarket sellers, since they might not have been connected to the CIM on your car.